Cosmetic Imperfections sale

Directions for use.

CLEANSE :

To avoid marring, ensure the area to be cleaned has been thoroughly pre-washed.

Shake well and dilute using fresh clean water in a high-quality Wash Bucket with Grit Guard (e.g. mile deep FILL):

1:80 parts water: heavy soiling.

1:200 parts water: medium soiling.

1:400 parts water: light soiling.

Apply a single coat using a high-quality Microfibre Wash Mitt (e.g. mile deep CARESS), working from top to bottom.

Rinse off with fresh clean water, ideally using a high-quality Pressure Washer.

BLACK:

Ensure the surface to be treated is thoroughly clean and dry.

Shake well and do not dilute (BLACK is ready-to-use).

Apply a small amount at a time to a clean and dry, high quality Tyre Applicator (e.g. mile deep DIRECT) and wipe on a thin layer.

Allow to air dry for 5 minutes (temperature dependent) and wipe off any excess with a clean and dry Microfibre Cloth (e.g. mile deep ENACT).

Further layers are not required but can be used to increase gloss.

ELEVATE:

Ensure the area to be treated is thoroughly clean and dry.

Shake well and do not dilute (ELEVATE is ready-to-use).

Apply a small amount at a time to a clean and dry high-quality Microfibre Applicator (e.g. mile deep APPLY) and wipe on a thin layer.

Allow to air dry or immediately wipe off with a clean and dry soft Microfibre Cloth (e.g. mile deep ENACT or ENACT+).

Further layers are not required but can be used to move from a satin to increasingly gloss finish.

SHEEN:

Ensure the area to be treated is thoroughly clean.

Shake well and dilute using fresh, clean (ideally deionised) water:

1:10 parts water: initial/fresh coating.

1:20 parts water: sporadic top-up coating.

1:50 parts water: regular top-up coating.

Apply a single coat using a high-quality Snow Foam Bottle/Cannon and Pressure Washer.

Allow to dwell for up to 5 minutes (temperature dependent) before rising off with clean water, ideally using a high-quality Pressure Washer.

Ensure treated surfaces are fully dried with a high-quality Drying Towel (e.g. mile deep ABSORB or ABSORB+).

RESOLVE:

Shake well and do not dilute (RESOLVE is ready-to-use).

Apply a single coat with a high-quality Mixing Bottle Sprayer (e.g. mile deep FOCUS).

Allow to dwell for up to 5 minutes (temperature dependent) and gently agitate if required.

Rinse off with a high-quality Pressure Washer.

Repeat for heavy contamination.

PURPLE:

Shake well and do not dilute (PURPLE is ready-to-use).

Spray a single coat directly onto the affected area (e.g. alloy wheels).

Allow to dwell for up to 5 minutes (temperature dependent) whilst a purple colour reveals the product is taking effect.

Rinse off with a high-quality Pressure Washer.

Repeat for heavy contamination.

REFRESH:

Shake well and do not dilute (REFRESH is ready-to-use).

Spray onto a clean and dry high-quality Microfibre Cloth (e.g. mile deep ENACT or ENACT+) and wipe onto surfaces.

For larger areas, use 30ml per square metre to ensure virucidal effect.

Allow to dwell for at least 1 minute for virucidal results. Allow to air dry or wipe off with a further clean and dry high quality Microfibre Cloth.

VISION:

Ensure that the area to be cleaned is thoroughly dry.

Shake well and do not dilute (VISION is ready-to-use) in colder to moderate temperature conditions.

For higher temperature conditions, dilute up to 1:1 part clean (ideally deionised) water to control (increase) evaporation times.

Spray onto a clean, dry, high quality Glass Cleaning Cloth (e.g. mile deep CLEAR) and wipe onto surfaces until the contamination cannot be seen or felt.

Immediately wipe off with a further clean, dry, high quality Glass Cleaning Cloth.