RELEASE :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Can be used undiluted for extreme soiling but may affect less durable Last Stage Products.

Store in a cool, dry location and keep out of reach of children and pets.

SNOW :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Can be used 1:5 parts water for extreme soiling without affecting Last Stage Products.

Store in a cool, dry location and keep out of reach of children and pets.

CLEANSE :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Store in a cool, dry location and keep out of reach of children and pets.

CARESS:

Machine-wash after every use at lower temperature and spin speed settings. Do not use high heat or boil wash settings, which damage fibres.

Do not wash and dry together with cotton-based items, which leave lint that attaches to fibres.

Use a bleach-free (ideally liquid based) fabric detergent. Do not use fabric softeners which clog fibres and lead to reduced performance.

Allow to fully air-dry or (ideally) machine dry on lower heat settings to open fibres.

Do not machine dry on high heat settings or expose to extreme temperatures, which damage fibres.

Store in a clean, dry and ideally sealed location to avoid contamination (e.g. from airborne dust particles)

BLACK:

Use on tyre side walls only.

Do not use on tyre treads (i.e. areas that contact the road) or on motorcycle or bicycle tyres.

Store in a cool, dry location and keep out of reach of children and pets.

ELEVATE:

Do not use on steering wheel grips or on foot pedals.

Store in a cool, dry location and keep out of reach of children and pets.

SHEEN:

Do not allow to fully air-dry before actively drying, taking additional care in direct sunlight and/or higher temperature conditions.

Store in a cool, dry location and keep out of reach of children and pets.

RESOLVE:

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Avoid contact with plastics.

Please note RESOLVE is an extremely concentrated, potent and effective formula and may have adverse effects if used on classic paint, smart repairs, and some lacquer finishes. Always test a small area of the vehicle before using this product on a full panel, and ALWAYS proceed with caution.

Do not wash Microfibre Cloths containing the product in a washing machine as damage to rubber seals may occur.

Store in a cool, dry location and keep out of reach of children and pets.

PURPLE:

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Do not use on bare aluminium.

Store in a cool, dry location and keep out of reach of children and pets.

REFRESH:

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Store in a cool, dry location and keep out of reach of children and pets.

VISION:

Do not allow to fully air-dry before wiping off.

Store in a cool, dry location and keep out of reach of children and pets.

Directions for use.

RELEASE :

Shake well and dilute using fresh, clean water:

1:1 part water: heavy soiling.

1:5 parts water: medium soiling.

1:10 parts water: light soiling.

Apply a single coat with a high-quality Mixing Bottle Sprayer (e.g. mile deep FOCUS).

Allow to dwell up to 5 minutes (temperature dependent) before rising off with a high-quality Pressure Washer.

CLEANSE :

To avoid marring, ensure the area to be cleaned has been thoroughly pre-washed.

Shake well and dilute using fresh clean water in a high-quality Wash Bucket with Grit Guard (e.g. mile deep FILL):

1:80 parts water: heavy soiling.

1:200 parts water: medium soiling.

1:400 parts water: light soiling.

Apply a single coat using a high-quality Microfibre Wash Mitt (e.g. mile deep CARESS), working from top to bottom.

Rinse off with fresh clean water, ideally using a high-quality Pressure Washer.

SNOW :

Shake well and dilute using fresh, clean water:

1:10 parts water: heavy soiling.

1:15 parts water: medium soiling.

1:20 parts water: light soiling.

Apply using a high-quality Snow Foam Bottle/Cannon and Pressure Washer.

Allow to dwell for up to 5 minutes (temperature dependent) before rising off with clean water, ideally using a high-quality Pressure Washer.

CARESS :

Generously load with high-quality diluted shampoo solution (e.g. mile deep CLEANSE) from a high-quality Wash Bucket with Grit Guard (e.g. mile deep FILL).

Using gentle pressure and moving in straight lines wherever possible, glide the loaded Microfibre Wash Mitt over each surface.

Work from top to the bottom, avoiding circular motions and repeating areas already covered. Wash single panels (or a half of large panels) at a time.

Carefully rinse with fresh clean water from a separate high-quality Rinse Bucket with Grit Guard. Re-load with fresh diluted shampoo solution from the Wash Bucket.

BLACK:

Ensure the surface to be treated is thoroughly clean and dry.

Shake well and do not dilute (BLACK is ready-to-use).

Apply a small amount at a time to a clean and dry, high quality Tyre Applicator (e.g. mile deep DIRECT) and wipe on a thin layer.

Allow to air dry for 5 minutes (temperature dependent) and wipe off any excess with a clean and dry Microfibre Cloth (e.g. mile deep ENACT).

Further layers are not required but can be used to increase gloss.

ELEVATE:

Ensure the area to be treated is thoroughly clean and dry.

Shake well and do not dilute (ELEVATE is ready-to-use).

Apply a small amount at a time to a clean and dry high-quality Microfibre Applicator (e.g. mile deep APPLY) and wipe on a thin layer.

Allow to air dry or immediately wipe off with a clean and dry soft Microfibre Cloth (e.g. mile deep ENACT or ENACT+).

Further layers are not required but can be used to move from a satin to increasingly gloss finish.

SHEEN:

Ensure the area to be treated is thoroughly clean.

Shake well and dilute using fresh, clean (ideally deionised) water:

1:10 parts water: initial/fresh coating.

1:20 parts water: sporadic top-up coating.

1:50 parts water: regular top-up coating.

Apply a single coat using a high-quality Snow Foam Bottle/Cannon and Pressure Washer.

Allow to dwell for up to 5 minutes (temperature dependent) before rising off with clean water, ideally using a high-quality Pressure Washer.

Ensure treated surfaces are fully dried with a high-quality Drying Towel (e.g. mile deep ABSORB or ABSORB+).

RESOLVE:

Shake well and do not dilute (RESOLVE is ready-to-use).

Apply a single coat with a high-quality Mixing Bottle Sprayer (e.g. mile deep FOCUS).

Allow to dwell for up to 5 minutes (temperature dependent) and gently agitate if required.

Rinse off with a high-quality Pressure Washer.

Repeat for heavy contamination.

PURPLE:

Shake well and do not dilute (PURPLE is ready-to-use).

Spray a single coat directly onto the affected area (e.g. alloy wheels).

Allow to dwell for up to 5 minutes (temperature dependent) whilst a purple colour reveals the product is taking effect.

Rinse off with a high-quality Pressure Washer.

Repeat for heavy contamination.

REFRESH:

Shake well and do not dilute (REFRESH is ready-to-use).

Spray onto a clean and dry high-quality Microfibre Cloth (e.g. mile deep ENACT or ENACT+) and wipe onto surfaces.

For larger areas, use 30ml per square metre to ensure virucidal effect.

Allow to dwell for at least 1 minute for virucidal results. Allow to air dry or wipe off with a further clean and dry high quality Microfibre Cloth.

VISION:

Ensure that the area to be cleaned is thoroughly dry.

Shake well and do not dilute (VISION is ready-to-use) in colder to moderate temperature conditions.

For higher temperature conditions, dilute up to 1:1 part clean (ideally deionised) water to control (increase) evaporation times.

Spray onto a clean, dry, high quality Glass Cleaning Cloth (e.g. mile deep CLEAR) and wipe onto surfaces until the contamination cannot be seen or felt.

Immediately wipe off with a further clean, dry, high quality Glass Cleaning Cloth.