PRE-WASH ESSENTIALS KIT

RELEASE :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Can be used undiluted for extreme soiling but may affect less durable Last Stage Products.

Store in a cool, dry location and keep out of reach of children and pets.

SNOW :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Can be used 1:5 parts water for extreme soiling without affecting Last Stage Products.

Store in a cool, dry location and keep out of reach of children and pets.

CLEANSE :

Do not allow to fully air-dry before washing off, taking additional care in direct sunlight and/or higher temperature conditions.

Store in a cool, dry location and keep out of reach of children and pets.

CARESS:

Machine-wash after every use at lower temperature and spin speed settings. Do not use high heat or boil wash settings, which damage fibres.

Do not wash and dry together with cotton-based items, which leave lint that attaches to fibres.

Use a bleach-free (ideally liquid based) fabric detergent. Do not use fabric softeners which clog fibres and lead to reduced performance.

Allow to fully air-dry or (ideally) machine dry on lower heat settings to open fibres.

Do not machine dry on high heat settings or expose to extreme temperatures, which damage fibres.

Store in a clean, dry and ideally sealed location to avoid contamination (e.g. from airborne dust particles)

ABSORB+ :

Machine-wash after every use at lower temperature and spin speed settings. Do not use high heat or boil wash settings, which damage fibres.

Do not wash and dry together with cotton items, which leave lint that attaches to fibres.

Use bleach-free (ideally liquid based) fabric detergent. Do not use fabric softeners which clog fibres and lead to reduced performance.

Allow to air dry or (ideally) machine dry on lower heat settings to open fibres.

Do not machine dry on high heat settings or expose to extreme temperatures, which damages fibres.

Store in a clean, dry and ideally sealed location to avoid contamination (e.g. from airborne dust particles).

Directions for use.

RELEASE :

Shake well and dilute using fresh, clean water:

1:1 part water: heavy soiling.

1:5 parts water: medium soiling.

1:10 parts water: light soiling.

Apply a single coat with a high-quality Mixing Bottle Sprayer (e.g. mile deep FOCUS).

Allow to dwell up to 5 minutes (temperature dependent) before rising off with a high-quality Pressure Washer.

CLEANSE :

To avoid marring, ensure the area to be cleaned has been thoroughly pre-washed.

Shake well and dilute using fresh clean water in a high-quality Wash Bucket with Grit Guard (e.g. mile deep FILL):

1:80 parts water: heavy soiling.

1:200 parts water: medium soiling.

1:400 parts water: light soiling.

Apply a single coat using a high-quality Microfibre Wash Mitt (e.g. mile deep CARESS), working from top to bottom.

Rinse off with fresh clean water, ideally using a high-quality Pressure Washer.

SNOW :

Shake well and dilute using fresh, clean water:

1:10 parts water: heavy soiling.

1:15 parts water: medium soiling.

1:20 parts water: light soiling.

Apply using a high-quality Snow Foam Bottle/Cannon and Pressure Washer.

Allow to dwell for up to 5 minutes (temperature dependent) before rising off with clean water, ideally using a high-quality Pressure Washer.

CARESS :

Generously load with high-quality diluted shampoo solution (e.g. mile deep CLEANSE) from a high-quality Wash Bucket with Grit Guard (e.g. mile deep FILL).

Using gentle pressure and moving in straight lines wherever possible, glide the loaded Microfibre Wash Mitt over each surface.

Work from top to the bottom, avoiding circular motions and repeating areas already covered. Wash single panels (or a half of large panels) at a time.

Carefully rinse with fresh clean water from a separate high-quality Rinse Bucket with Grit Guard. Re-load with fresh diluted shampoo solution from the Wash Bucket.

ABSORB+ :

For larger surface areas, lay the ABSORB flat and use its natural weight for pressure. Carefully pull across the surface in a single direction.

For smaller areas, fold the ABSORB into half or quarters and apply gentle pressure in a controlled patting motion.

For hard-to-reach areas, create unique bundled shapes and gently pat as required.

Avoid applying high pressure, wiping and circular motions wherever possible.

Use a fresh Microfibre Drying Towel when one becomes overly laden with water.