Additional information for GLASS KIT

Care Guide

VISION :

Do not allow to fully air-dry before wiping off.

Store in a cool, dry location and keep out of reach of children and pets.

CLEAR :

Machine-wash after every use at lower temperature and spin speed settings. Do not use high heat or boil wash settings, which damage fibres.

Do not wash and dry together with cotton items, which leave lint that attaches to fibres.

Use bleach-free (ideally liquid based) fabric detergent. Do not use fabric softeners which clog fibres and lead to reduced performance.

Allow to air dry or (ideally) machine dry on lower heat settings to open fibres.

Do not machine dry on high heat settings or expose to extreme temperatures, which damages fibres.

Store in a clean, dry and ideally sealed location to avoid contamination (e.g. from airborne dust particles).

Directions

Ensure that the area to be cleaned is thoroughly dry. 

Shake well and do not dilute (VISION is ready-to-use) in colder to moderate temperature conditions. 

For higher temperature conditions, dilute up to 1:1 with clean (ideally deionised) water to control (increase) evaporation times. 

Spray onto a clean, dry, high quality Glass Cleaning Cloth (e.g. mile deep ) and wipe onto surfaces until the contamination cannot be seen or felt. 

Immediately wipe off with a further clean, dry, high quality Glass Cleaning Cloth. 

FAQs

Q1. Why should I consider VISION compared to alternatives? 

A1. VISION has a uniquely high concentration of cleaning agents which create a rapid flash-off point that avoids smearing, whilst being eco- and wallet-friendly! 

Q2. Where can I use VISION? 

A2. VISION is safe to use on all glass surfaces and can also be used on metal surfaces. 

Q3. Can VISION be diluted? 

A3. VISION has been formulated to be ready-to-use but can be diluted to suit higher temperature conditions to regulate the flash-off time should it prove too rapid. 

Q4. Can I use VISION with microfibre cloths? 

A4. To avoid smearing, it is recommended to use a dedicated Glass Cleaning Cloth (e.g., mile deep ), using a fresh side of the cloth with each application and a fresh cloth whenever a significant amount of grime is removed. 

Q5. Do I need to remove any previously applied products before applying VISION? 

A5. VISION can be used straight away with no need to remove or apply other products beforehand. 

Q6. Can I try VISION before buying? 

A6. Due to the high environmental impact of producing and distributing small samples, we welcome you to visit our to try out and receive advice on any products you are interested in. 

Q7. How quickly can you deliver VISION? 

A7. We aim to dispatch all orders as quickly as possible, which in the majority of cases is the same day! Please see the relevant sections of our for further information. 

Q8. Can I return VISION if it arrives damaged? 

A8. We aim to resolve all issues fairly, fully and as quickly as possible, which includes the rare case of orders genuinely damaged or lost in transit. Please see the Damage and Loss sections of our for further information. 

Q9. Do you provide a guarantee for VISION? 

A9. We have developed all mile deep products to meet and exceed all required safety and quality standards and we therefore provide assurances that exceed your Statutory Rights. Please see the Faults and Returns sections of our for further information.

Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment
Caring For Your Car And The Environment

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)